Exactly how to Troubleshoot and Fix an Electric Water Heater
Exactly how to Troubleshoot and Fix an Electric Water Heater
Blog Article
What are your thoughts and feelings on No Hot Water — Water Heater Repair?
Many modern houses use an electrical hot water heater for their heating system, due to its convenience as well as ease of use. However, similar to any other electric home appliances, issues may arise with its use, all of a sudden. It can be truly aggravating to awaken to a cold shower as opposed to a warm one or having your bathroom with water that isn't hot enough or perhaps also warm. Whatever the case may be, hot water heater troubles can be rather nerve-racking. Fortunately, we have actually made a listing of possible options to your hot water heater problems. There are a variety of aspects that might trigger a lot of these issues, it could be an issue with the power supply, the electrical heating element, or the thermostat. Before doing anything, guarantee you switch off the major power supply for safety and security. Whatever the issue is, getting it taken care of must not position excessive of an issue if you follow these steps:
Call A Specialist:
If after changing all malfunctioning components as well as resetting your temperature, the water heater still isn't functioning, you might require to call a professional plumber for a professional opinion. The trouble with your heating system could be that the hot and cold faucets have actually been changed or it may be undersized for the quantity of warm water required in your home. Whatever the case might be, an expert plumber would help address the trouble.
Inspect Your Power Supply:
As basic as this might appear, it is very essential. Without appropriate power, your water heater will not operate. So the first thing to do when your water unexpectedly stops working is to validate that it isn't a power issue. Check if the fuse is burnt out or the circuit breaker tripped. If the breaker is the problem, simply transform it off and on again. Change any type of broken or damaged fuse. Evaluate the appliance with power after these adjustments to see if it's now functioning.
Inspect Your Thermostat:
If your water heater still isn't functioning or the water coming out isn't warm sufficient, you may require to check the temperature level settings on your upper thermostat. Make sure the circuit breaker is turned off before doing anything. Open up the gain access to panel and press the red button for temperature level reset above the thermostat. This need to assist heat the water. Transform the circuit breaker back on and also check if the trouble has been settled.
Check the Burner in the Water Heater:
If it's not a power issue, then attempt checking out your burner if it is still functioning. Evaluate each of your burner to make sure the trouble isn't with any of them. If any one of them is defective, change that part and after that check whether the hot water is back on.
Final thought
Hot water heater troubles are not constantly major. A lot of them are because of small concerns like a blown fuse or damaged heating element. Replacing the defective components must suffice. However, if you are still unable to resolve the issue, give a call to your nearby plumber ahead to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
As a passionate reader about What Would Cause My Electric Water Heater to Stop Working?, I thought sharing that excerpt was important. Make sure you take the opportunity to share this blog entry if you enjoyed it. Thanks for your time. Don't hesitate to check up our blog back soon.
Click Here!
Report this page